Through the Interface

The Call for Proposals is open for Autodesk University 2025

The countdown is officially on for AU 2025, which is being held in Nashville, Tennessee, from September 16-18. Things kicked off properly on Thursday with the CFP opening. It’ll be possible to submit your class proposal from now until April 17. The big news for this year’s event is that there will be a new class length available to folks: in addition to a 50+10 (talk+Q&A, in minutes) session there will be the option of 20+10, also. It will also only be possible to submit a maximum of 3 proposals per person. This might not sound like a big... Read more →

Gearing up for AU 2024

We’re once again in the craziness before the storm (hmm - wasn’t there meant to be some calm?!?) that is Autodesk University. Requests for meetings are gradually filling up calendars… from my side it’s looking like another busy (but very fun) event. As a reminder, here are the classes that I’ll be part of, in some capacity this year. The class on extending Forma - where I’m co-speaking - has the slides and handout posted, in case you want to check it out ahead of time. In anticipation of this year's event (and the chance to connect with academic... Read more →

Death of the Metaverse. Come work on XR at Autodesk!

You don’t have to look far, these days, to find dire prognostications about the death of the Metaverse. That’s the nature of the hype cycle: those without the patience to help push technology through the Trough of Disillusionment move on to other things. Although the speed with which the Metaverse passed the Peak of Inflated Expectations in 2022 is impressive. Interestingly the Gartner Hype Cycle for 2016 reported Virtual Reality as having emerged onto the Slope of Enlightenment, but even at this time I felt this was premature. These models do have to be seen as what they are:... Read more →

AI+X Summit 2022

On Friday I hopped on a train to Zurich to attend the AI+X Summit 2022 event – organised by the ETH AI Center – which was co-located with the ETH Entrepreneur Club’s Launch event. It was a lovely autumn day, and the colours were even on display in Zurich’s Oerlikon district. The event was held at Stage One, an event space a short walk from the Oerlikon train station. I was mainly there for the AI+AEC workshop, but there were a number of mainstage presentations and exhibits by startups and larger companies involved in AI. The workshops were held... Read more →

Come work on XR technologies at Autodesk!

Earlier this year Autodesk acquired The Wild along with its own recent acquisition, IrisVR, and their Prospect platform for XR collaboration. This was really exciting news for those of us who believe VR/AR/MR to be hugely interesting technologies with significant potential to impact our customers’ workflows. To review, here’s a 10-minute video showing how The Wild works: Of course this isn’t the first time Autodesk has focused serious resources on developing XR solutions: the first was in the late 80s/early 90s, with the Cyberspace Developer Kit, while another was around 5 years ago with our former (VR-capable) game engine,... Read more →

Become a resident at an Autodesk Technology Center and get access to a HoloLens 2

Our Technology Centers team has posted an interesting RFP on LinkedIn: they’ve been working with Microsoft to make HoloLens 2 headsets available to Technology Center residents interested in exploring mixed reality workflows for the AEC and Manufacturing industries. It seems pretty straightforward: if you’re interested in developing a mixed reality solution – whether using Unity, Unreal or WebXR – then you need to submit your proposal before August 24th, 2020. If accepted you’ll be invited into our residency program and provided a HoloLens 2 device for 6 months (with the possibility of extending the term, if needed). This seems... Read more →

Virtual Forge Accelerators – coming to an office (very) near you

For two of the last three weeks I’ve been lurking in virtual Forge Accelerators: as I mentioned last time, the Forge team has pivoted to virtual events after this year’s Accelerator in Sydney was forced online due to a COVID-related office closure. (Incidentally I need to get used to the team’s new name: they recently switched from Forge Partner Development to Developer Advocacy and Support. FPD is no more, the future is DAS!) The DAS team has since gone “all in” on these events, holding two during the month of April. The first one was codenamed Metropolis and ran... Read more →

Using A-Frame to build a VR experience for Refinery

This week I decided to take the WebVR/WebXR extension work I did for Van Wijnen to the next level: mainly to integrate metric information in some way into the scene, whether as 3D text objects or via some kind of Heads-Up Display (HUD). But before embarking on this I decided to take another look at the implementation of the HTML client. When I first wrote the HTML page that consumes geometry data from the Refinery server, I decided to use raw JavaScript and WebVR/WebXR calls with three.js. I’d thought briefly about using A-Frame – an awesome framework started by... Read more →

Connecting Refinery to VR

It’s time to talk about a little project I started over the holiday break: connecting Project Refinery – the optimization engine for Dynamo that will help drive Generative Design workflows – to Virtual Reality. It’s a project I’ve been thinking about for some time, now, and was originally inspired by two things: the workflow Van Wijnen uses Refinery for makes heavy use of VR for visualization – to evaluate designs with internal stakeholders – but right now they export the geometry from Dynamo to Revit and then use Enscape to visualize the scenes. It’s not a complicated process, but... Read more →

Welcome to 2019, the year of Generative Design

Happy New Year! I’ve just come back online after a wonderful (and much-needed) 2-week break. I hope those of you who were lucky enough to get time off at this time of year made the most of it and managed to spend some quality time with your loved ones. (I will admit that since the beginning of this year I’ve been spending a little time working on a really fun side project, so I can’t say I’ve disconnected completely… but more on this later. :-) As I don’t really have an image to accompany this post, here’s a quick... Read more →

Rob|Arch 2018

I spent the latter half of last week at ETH Zurich, attending a conference entitled “Robotic Fabrication in Architecture, Art and Design 2018”, or Rob|Arch 2018 for short. This is the biennial conference where luminaries in the AEC industry get together and plot how robots will replace millions of construction jobs over the years to come. Not really, of course: the big thrust of this conference is to work out how robotic fabrication technology might (or must) be applied to meet the housing needs of a planet whose population is expected to increase by nearly 30% over the coming... Read more →

Don’t miss these sessions at the Forge DevCon in Las Vegas

The Forge DevCon is a great place to dive deeply into what’s possible – and what will soon be possible – with the Forge platform. I’m involved in the organisation of the Las Vegas DevCon – being held on November 12-13, 2018 – in that I help lead one of the tracks. When the first DevCon took place, back in 2016, I was track-lead for the AR/VR track… these days I’m co-track-lead with my old friend Cyrille Fauvel for the Complementary Technologies track, which incorporates topics such as AR/VR, AI and robotics. All the really fun stuff, basically. ;-)... Read more →

AEC Hackathon Berlin 2018

I’ve just arrived back from Berlin, which I was primarily visiting for this year’s German AEC Hackathon (last year’s was in Munich, which I attended briefly in the weeks leading up to our big trip). I was there with my family, and we had a great time visiting the city when I wasn’t needed at the Hackathon. Let’s start with a few tourist shots. On Thursday we visited a few places, such as the Holocaust Memorial… … and the Berlin Cathedral, which was beautiful inside but had stunning views across the city from its roof. We were staying with... Read more →

Leap Motion’s Mirrorworlds concept

I haven’t been spending much time, of late, on XR (the convenient abbreviation for AR/VR/MR), but this blog post got my attention. Our friends at Leap Motion – the company who created interesting technology for capturing hand gestures and who has, over the last few years, executed a fairly successful pivot to focus on XR – have put together an interesting concept that does a good job of making XR compelling for various scenarios. Warning: be careful not to confuse Leap Motion with the once-future-of-mixed-reality-but-now-looking-increasingly-overhyped Magic Leap… 3+ years ago Magic Leap was hot news with their cool promotional... Read more →

Just a few weeks until the AEC Hackathon in Berlin

On July 20-22, 2018 I’ll be attending the AEC Hackathon in Berlin. Here’s some information about the event: The AEC (Architecture, Engineering and Construction) Hackathon is a weekend of geeking at its finest. It gives those designing, building and maintaining our built environment, the opportunity to engage, collaborate and interact on multiple aspects of the building industry. Not all built environment professionals have to code or have much background with tech. Just come with your knowledge, an open mind, collaborative spirit, and willingness to solve Mon-Fri problems leveraging various kinds of technology. We’ve shaped an exhilarating Program on Robotics,... Read more →

Hackrod is open to the crowd

I was really excited to hear, over the weekend, that our friends at Hackrod have launched a successful crowd-funding campaign and that there’s still time to participate. The campaign is being hosted on MicroVentures, which means investors should receive interest on their investment as well as equity in the project, assuming things work out. This admittedly seems a nicer model than getting a T-shirt or coffee mug saying you supported their Kickstarter. ;-) I haven’t yet decided whether I’m personally going to get in on the action (so to speak) but I thought I’d post about it in case... Read more →

A summary of news from Forge DevCon 2017

For those of you who – like me – weren’t able to travel to Las Vegas for this year’s Forge DevCon, I thought I’d do a quick round-up of the major news that I could extract over the wire. I’m sure there will be further blog posts from the Forge team summarising more of things I couldn’t see – not being there in person – but this will hopefully be of some use to people, at least. To kick things off, I suggest reading this blog post. It talks about some high-level items, such as additions to the platform,... Read more →

Picton to Christchurch

As much as I hate compressing so much into a single post, I don’t see any other option if I’m to bring you all up-to-date. So please accept my apologies for not doing justice to New Zealand’s absolutely incredible south island. In this post we’ll talk about the first part of the journey through the south island, from Picton to Christchurch. I’ll cover the journey from Christchurch to Queenstown in the next post. Here’s a quick view of our journey southwards, for context. Our adventure on the south island started the Saturday before last. We took the 2.45pm Interislander... Read more →

Integrating the 3dRudder with AutoCAD

I mentioned this device, late last year, and have been meaning to spend time integrating it into AutoCAD ever since. The 3dRudder is an interesting perpheral: while currently targeted at helping seated VR users navigate intuitively in 3D – effectively keeping their hands free – it was originally intended for CAD users. So it’s nice that it’s going back to its roots, as it were. Here’s an excerpt of a video of Christian Slater demoing the 3dRudder integration with Rhino (I’m kidding about it being Christian Slater – he just looks a bit like him :-). Over the last... Read more →

Autodesk is seeking a Senior Evangelist for AR/VR

There’s a very interesting job posting that I wanted to highlight for readers of this blog: Autodesk’s Immersive Experiences Group (IXG) is seeking a Senior Evangelist for Augmented and Virtual Reality. IXG is a fairly recently named group at Autodesk: I’m curious about the choice of the term Immersive, as my understanding is that the organisation’s mandate is very much also about Augmented and Mixed Reality, which for me is more contextual than immersive. But frankly that’s a minor detail: IXG does have a nice ring to it, and we do love our TLAs at Autodesk. Here’s an excerpt... Read more →