Through the Interface

The first anniversary of the MX3D Bridge installation

While I was out on holiday, I received a newsletter from MX3D that I thought worth sharing here, too. It highlighted the fact that a year (actually 13 months, by this point) has already passed since the MX3D Bridge was installed in downtown Amsterdam. How time flies! The MX3D team put together this really nice video that shows details of the bridge’s design, construction and installation: Here’s the content of the newsletter article in question, © MX3D: We’re very happy to celebrate the first anniversary of the installation and public opening of the MX3D Bridge! We are looking back... Read more →

Smarter Bridges Conference 2022

On Sunday I flew back across from Zurich to Schipol for a small, 2-day conference attended by various stakeholders in the MX3D smartbridge project. Very confusingly there were two flights leaving for Amsterdam at exactly the same time – 17h35 – so I very nearly ended up at the wrong gate. Luckily I realised in time. On arriving at Schipol I took the train to Amsterdam Centraal, where I saw an overnight train back to Switzerland was about to leave. (I had tried hard to find a space on this train to come across for the conference, but it... Read more →

Previewing and viewing PDFs inside Dasher

A couple of days ago we were looking for the datasheets for the various sensors installed in the MX3D bridge: as you’ve probably already read, there are nearly a hundred sensors in and on the bridge, although of only about eight different model types. My colleague Josh Cameron said, in passing, “it would be really handy to have these datasheets integrated into Dasher!”. As usual, this sent me down a rather fun rabbit-hole for a day or so, to see how we might reasonably integrate these PDFs into Dasher. Firstly it’s worth pointing out that these days the Forge... Read more →

AU 2021 update & MX3D on the AU blog

The count-down to Autodesk University 2021 continues, with registration for the event now open. I’ve gone ahead and registered, as I expect many of you will at some point during the remaining 54 days. It’s free, after all, and I’m sure will have lots of great content, as usual. Be sure to put the dates in your calendar – October 5-7 for the Americas, October 6-8 for EMEA & APAC, October 13-14 for East Asia. The timing of this year’s event – being several weeks earlier – means that it falls during our children’s half-term break. This year –... Read more →

The MX3D bridge and its colours

After having talked about its opening, and its data, it’s time to wrap up this week’s triptych of posts about the MX3D bridge by taking a moment to appreciate its beauty. The bridge has been printed from stainless steel and has not received any surface treatment – other than sandblasting and the manual removal of any jaggedness that might cause injury… the point is that there isn’t a layer of paint or lacquer covering it. It’s amazing to me (again, a software guy, so take this with a pinch of salt) that the bridge has this golden sheen. The... Read more →

Data from the MX3D smart bridge

The MX3D team first showed the smart bridge to the public back in October 2018 at Dutch Design Week in Eindhoven. I was there with the team to finish and test features such as realtime display of skeletons detected using computer vision. Here’s a reminder of how that went: An interesting aspect of the public’s response to the bridge at DDW2018 was that it had broad appeal to people but that people appreciated different aspects of the project: The majority view: “wow, what a cool-looking bridge!” Those who dug a little deeper: “it was 3D-printed by robots? Interesting –... Read more →

The MX3D bridge opens to the public

On Wednesday afternoon I headed back across to Zurich airport for my second trip to Amsterdam in as many weeks. This time I was flying with Swiss rather than KLM, and ended up checking in and boarding through an area of the airport I didn’t recognise at all. Whether this was because it had been so long since I’d been there or due to some deep refurbishment being completed during the pandemic remains to be seen. By the time I arrived in Amsterdam, things had progressed significantly with the MX3D bridge. Here’s a fun staged photo by Thijs Wolzak... Read more →

Lowering the MX3D bridge

Now that the weekend has passed and the football is over for another year or so (for me, anyway, as I only pay attention to major tournaments), I thought I’d share some of the work that was done last week on the MX3D bridge, and what’s planned for this coming week. The major work done on Friday was to raise the bridge (allowing access to the current foundations) and to start the job of lowering it. Sometimes you have to go up to go down. I was impressed by the fact the bridge could be raised – one end... Read more →

An update from Amsterdam

It’s now Thursday night, and tomorrow morning we’ll be heading home from Amsterdam. As with any project, some things haven’t gone quite as smoothly as they might, but more on that in a bit. My son and I proudly donned our MX3D T-shirts for this morning’s pic: Here’s another shot from the bridge itself, looking down the canal. Now for some information about the main issue currently impacting the project. Here’s a video I took while on the bridge, that shows a quick walkover and the canal views. As you can see, there’s an issue with the clearance between... Read more →

The light at the end of the… smart bridge

This weekend I had a very strange task to perform: I had to book travel for work. Remembering how our corporate travel system worked was just one hurdle to cross – beyond that I had to deal with getting the appropriate management and travel department approvals, along with the fact I’ve booked a separate ticket for my 16-year old son to come along, and wanted to be 100% sure that we’re on the same flight. Was life really this complicated pre-pandemic? I’m sure I’ll get used to it all again, before long. The reason I’m travelling is pretty exciting,... Read more →

Integrating Hyperion’s object shading into Dasher – Part 1

Over the next few posts – in this series, anyway – we’re going to take a look at the shading of objects (actually meshes) using the Forge viewer’s Data Visualization Extension (Project Hyperion). This is something we’ve done in Dasher for some time, and I was excited that using Hyperion would once again allow us not only to rip out some of our old code but also to go in new directions and explore interesting new capabilities. Let’s first explain how this type of shading differs from what we’ve seen in previous posts, namely volumetric room and planar shading:... Read more →

Integrating Hyperion's planar heatmaps into Dasher

Having spent time recently looking at integrating sprites and volumetric room heatmaps into Dasher, today we move on to a capability that we didn’t have previously but has been enabled by Project Hyperion (i.e. the new Data Visualization Extension for the Forge viewer): planar heatmaps. Planar heatmaps do just what you’d expect: they display a heatmap for 3D geometry in a plane. This means you can display a heatmap on the floor or ceiling of rooms, or place them on tables or work surfaces. They might – for instance – be used to indicate usage of an area, such... Read more →

Integrating Hyperion's volumetric room heatmaps into Dasher – Part 1

Today’s post is a follow-on from the first part where we looked at integrating Hyperion sprites into Dasher. (The posts are independent, though, so you don’t have to read the first one if you’re only interested in integrating heatmaps.) I was supposed to publish this at the beginning of the week, but I ended up getting bogged down by a couple of urgent projects – both of which I’m happy to say have led to me making some interesting enhancements to Dasher, which is, at least, something. Anyway, the topic I wanted to share is the approach for integrating... Read more →

The MX3D bridge on Quarantime

My friend and incredibly inspiring former colleague, Mickey McManus, has been co-hosting a regular (I want to say weekly) live-streamed event under the name of Quarantime. They’ve just posted the 51st episode (which means they must be doing this more than once per week) which featured another friend and current colleague, Alec Shuldiner. Alec has been the real workhorse driving forward the MX3D Smart Bridge project and Autodesk’s involvement in it. He joined Quarantime to talk about the project in the context of our cities’ future digital infrastructure. Here’s a snapshot with Project Dasher as a backdrop: It’s really... Read more →

Halloween and 3D skeletons

This year’s Halloween was destined to disappoint: we’d held out some hope until the 30th that the kids (which just means our youngest, at this point) would end up being able to go trick-or-treating in our village. Understandably – but disappointingly – the announcement came that any kind of trick-or-treating was off the cards for this Halloween. Stricter rules about groups of people were also announced, but with effect from today. From today onwards any kind of public or private event can have a maximum of 5 people present. Given the acceleration of cases in Switzerland, this is completely... Read more →

The new Types By Level panel in Project Dasher

Over the last month or so we’ve been focused on the benefits brought to Project Dasher by combining 2D heatmaps with our traditionally 3D view of the world. We started by creating 2D heatmaps, making them resizable, adding lots of them inside Dasher, and then making them pinnable per-level, before introducing the idea of overlaying building systems information, too. Most recently we took a sneak peek at the topic of today’s post, a new UI that simplifies access to these 2D (and 3D) heatmaps. The idea came up during a team meeting: as we realised we had this combinatorial... Read more →

A sneak peek at Dasher’s new Types By Level UI

This week has been a little crazy in terms of presentations. On Monday it kicked off with an internal project review followed by a presentation to a class of Masters students from the University of Southern California (it was a lunchtime session for them, so it was a late evening one for me). It wrapped up yesterday with the generative design session for the Swiss Data Science Center, which despite a few technical hitches (not on my side, thankfully) seemed to go pretty well. I was told there were upwards of 400 attendees registered for the event, but I... Read more →

The first BIM 360 community event in Switzerland

Yesterday I was back at the NEST building in Dübendorf for Autodesk’s first BIM 360 community event in Switzerland. It was nice to be back there, even if just to see the progress being made on the construction of the HiLo roof. Here’s the view from the ground: I also went up to take a few snaps from the roof. You can clearly see the knitted cabling that will provide support for the structure. There were a few people working on the structure, too. (I took my snaps from an open doorway as I didn’t want to disturb them.)... Read more →

AU London 2019

It’s been a crazy (but very cool) few days here in the UK and Ireland. It started with the pre-event (or perhaps the pre-pre-event) of the annual Autodesk football tournament in Dublin. We didn’t win, but we had an absolute blast. I’m definitely looking forward to next year’s event in Barcelona! On Sunday a group of us flew from Dublin into Heathrow: the others headed directly into town, while I stopped at a friend’s for dinner in Windsor. Heading into town, later on, I saw a message from Jaime Rosales: the Circle & District lines were completely closed, so... Read more →

A short video about the MX3D smart bridge project

I’ve been having a lot of fun working on projects I can’t really blog about, this week – on the one hand hacking Refinery to add some new UI features I thought would be interesting to explore, and on the other hand working in Dynamo to make some architectural changes to the Van Wijnen tool – so I really haven’t had much time to blog about anything here. Hopefully I’ll have more to talk about during the last few weeks before the holidays. I did just want to publish this video created by my friend and colleague Merry Wang... Read more →