Through the Interface

Building the 5m Dar Smart Bridge

Now that my head is briefly back above water following Autodesk University 2022 and some time off with the family, I thought I’d revisit the Dar 5m Smart Bridge project to share some of the things I learned about it during AU in New Orleans. As a reminder, I was not heavily involved in the building of the bridge itself – although I did track it with great interest from a distance – as my role really only came into play in the final stages of the project, when we were looking to get the data from the bridge... Read more →

Come and see the 5m Dar Smart Bridge at Autodesk University 2022

In a recent post I hinted at a really impressive project that is being unveiled today in the exhibit hall of AU 2022. (My involvement was as usual pretty minor, primarily relating to data visualization, while the really impressive work was around designing and printing it.) The project is a 5 metre long single-cantilevered (in terms of the printing – it’s supported at both ends when in use) smart bridge, 3D-printed from recycled PETG and glass fibre in our Boston Technology Center for Dar. Here’s a video shared via LinkedIn that describes the project and a photo of Steve... Read more →

Counting down to AU 2022

There’s now just a month to go before many will be travelling to New Orleans for the first in-person Autodesk University since 2019. Aside from being back at event with 10,000 or so attendees – something many of us may well have forgotten how to do, including myself – this year’s event will be different from those in recent years as it’s being held somewhere other than Las Vegas. In Vegas it’s possible to have that many people (give or take) hosted along with a full conference – including a significant exhibition space and somewhere to feed the hungry... Read more →

A special unveiling at AU 2022

The Autodesk Research team is currently printing something very special in our Boston Technology Center with the hope of it being displayed at Autodesk University 2022 in New Orleans. I expect to be spending quite a bit of time near this object, during the event, and am very much looking forward to it. Even at this early stage it’s already a thing of great beauty. Now for some pre-AU fun and games: if you can guess the object’s function and how much it’ll weigh once finished – within an as-yet-undetermined threshold – then I’ll send you a souvenir from... Read more →

3D printing with recycled PET at Autodesk London

I’m in London for a few days this week for some internal meetings and a customer visit. While visiting the Soho office I checked in with my Autodesk Research colleague Allin Groom about a project he and Matt Oosthuizen have undertaken to help reduce the impact of waste in the office. The inspiration for the project was an all too common problem: a lot of waste generated by employees – many of whom buy takeaway lunches at local shops and restaurants – comes in the form of polyethylene terephthalate (PET) containers. While this material is nominally recyclable, Allin and... Read more →

The Autodesk Gallery opening and the 2m Dar Smart Bridge at DCW 2022

A few events have happened over the last few weeks that I would have loved to have attended, had I had the energy (and been in better shape). The first was the grand opening of the Autodesk Gallery on May 11th. I received an invite – because of my participation in the NEST project – but as I was planning on actually being at the NEST building that day I declined. And I ended up being home with Covid, so there’s that. The gallery was opened by SF Mayor London Breed. Here’s a snap of Andrew Anagnost showing the... Read more →

Smarter Bridges Conference 2022

On Sunday I flew back across from Zurich to Schipol for a small, 2-day conference attended by various stakeholders in the MX3D smartbridge project. Very confusingly there were two flights leaving for Amsterdam at exactly the same time – 17h35 – so I very nearly ended up at the wrong gate. Luckily I realised in time. On arriving at Schipol I took the train to Amsterdam Centraal, where I saw an overnight train back to Switzerland was about to leave. (I had tried hard to find a space on this train to come across for the conference, but it... Read more →

The NEST building’s HiLo roof

This week I was supposed to be back in Zurich for a couple of days, visiting the NEST building on Tuesday and the ETH campus on Wednesday. As it was, though, I managed to pick up Covid at last week’s TechX event in Atlanta, so I ended up staying at home feeling sorry for myself. I haven’t had particularly bad symptoms, thankfully: neither headaches nor fever, just mainly a heavy cough and a bit of brain fog, both of which are thankfully clearing up now. Given the value of last week’s event I’d certainly say that getting it relatively... Read more →

Three AU proposals to vote for and a deadline reminder

It’s the last few days to submit your class proposals for Autodesk University 2022 in New Orleans. The Call for Proposals closes on April 15th. I’ve now submitted three classes, myself, and would greatly appreciate you voting for the one(s) you would like to see part of the event. This is whether you intend on being there in-person in New Orleans or not: the vast majority of classes will either be livestreamed or recorded and made available on-demand for virtual attendees. Here they are. Voting is open until April 25th. Voxel-based Architectural Space Analysis inside Dynamo Building Digital Twins... Read more →

Building the 2m Dar Smart Bridge

Colleagues in Autodesk Research have been working with Dar Al-Handasah on a project to 3D print a series of footbridges with integrated sensors. It’s similar in some ways to MX3D’s Smart Bridge Amsterdam, but printing with plastic rather than steel. I’ve talked about the bridge at a couple of events, now, so I thought it was time to share some more information about this fascinating project. My role in the project is, once again, fairly minor: I’ve been helping with the visualization of sensor data from the bridge inside Dasher (more on that later on), but it’s been fun... Read more →

The MX3D bridge and its colours

After having talked about its opening, and its data, it’s time to wrap up this week’s triptych of posts about the MX3D bridge by taking a moment to appreciate its beauty. The bridge has been printed from stainless steel and has not received any surface treatment – other than sandblasting and the manual removal of any jaggedness that might cause injury… the point is that there isn’t a layer of paint or lacquer covering it. It’s amazing to me (again, a software guy, so take this with a pinch of salt) that the bridge has this golden sheen. The... Read more →

Data from the MX3D smart bridge

The MX3D team first showed the smart bridge to the public back in October 2018 at Dutch Design Week in Eindhoven. I was there with the team to finish and test features such as realtime display of skeletons detected using computer vision. Here’s a reminder of how that went: An interesting aspect of the public’s response to the bridge at DDW2018 was that it had broad appeal to people but that people appreciated different aspects of the project: The majority view: “wow, what a cool-looking bridge!” Those who dug a little deeper: “it was 3D-printed by robots? Interesting –... Read more →

The MX3D bridge opens to the public

On Wednesday afternoon I headed back across to Zurich airport for my second trip to Amsterdam in as many weeks. This time I was flying with Swiss rather than KLM, and ended up checking in and boarding through an area of the airport I didn’t recognise at all. Whether this was because it had been so long since I’d been there or due to some deep refurbishment being completed during the pandemic remains to be seen. By the time I arrived in Amsterdam, things had progressed significantly with the MX3D bridge. Here’s a fun staged photo by Thijs Wolzak... Read more →

Lowering the MX3D bridge

Now that the weekend has passed and the football is over for another year or so (for me, anyway, as I only pay attention to major tournaments), I thought I’d share some of the work that was done last week on the MX3D bridge, and what’s planned for this coming week. The major work done on Friday was to raise the bridge (allowing access to the current foundations) and to start the job of lowering it. Sometimes you have to go up to go down. I was impressed by the fact the bridge could be raised – one end... Read more →

An update from Amsterdam

It’s now Thursday night, and tomorrow morning we’ll be heading home from Amsterdam. As with any project, some things haven’t gone quite as smoothly as they might, but more on that in a bit. My son and I proudly donned our MX3D T-shirts for this morning’s pic: Here’s another shot from the bridge itself, looking down the canal. Now for some information about the main issue currently impacting the project. Here’s a video I took while on the bridge, that shows a quick walkover and the canal views. As you can see, there’s an issue with the clearance between... Read more →

First glimpse of the MX3D bridge installed

This morning I headed with our eldest son (he’ll be 17 in just over a week – how did that happen?) to Zurich airport to catch our first flight in what seems like forever to travel to Amsterdam to see the MX3D bridge being installed. Even catching the train was surreal: I’ve certainly done so, during the pandemic, but only for personal trips. My usual habit of grabbing breakfast in the dining car didn’t go so smoothly when I realised I could no longer remember the PIN for my corporate card. Luckily I could go contactless – SBB breakfasts... Read more →

The MX3D bridge on Quarantime

My friend and incredibly inspiring former colleague, Mickey McManus, has been co-hosting a regular (I want to say weekly) live-streamed event under the name of Quarantime. They’ve just posted the 51st episode (which means they must be doing this more than once per week) which featured another friend and current colleague, Alec Shuldiner. Alec has been the real workhorse driving forward the MX3D Smart Bridge project and Autodesk’s involvement in it. He joined Quarantime to talk about the project in the context of our cities’ future digital infrastructure. Here’s a snapshot with Project Dasher as a backdrop: It’s really... Read more →

Additively Manufacturing Music using the Printesizer

I mentioned in the last post that I had a fun topic to share to help get the new decade started. Well, here it is! I’ve been collaborating with Elias Cohenca from our Tel Aviv office on and off over the last few years: Elias managed to port the THREE.MeshLine JavaScript library to work with THREE.js r71, making it compatible with the current releases of the Forge viewer. We’ve made heavy use of this library in Dasher 360 to represent skeletons and streamlines, for instance. I’ve also been mentoring Elias, something I mentioned in this post from the middle... Read more →

Back at NEST

The week before last I headed across to Zurich for the day for meetings. During the afternoon I passed by the NEST building in Dübendorf – home of the DFAB House project – to meet with NEST’s Director, Reto Largo, and talk more about our plans to collaborate. To learn a bit more about what’s happening with this fantastic building, it’s worth checking out this session from AU 2018 in Las Vegas delivered by both Reto and Thomas Müller from Mensch und Maschine Schweiz. Our plan is to “Dasherize” the whole building, which has upwards of 2,000 sensors in... Read more →

A high-tech glitter bomb designed with Fusion 360

There’s a video that’s currently going viral on YouTube – with 35 million views and at #4 on the trending list – wherein a former NASA engineer turned professional YouTuber (sigh) shows how he designed and deployed a super-cool glitter bomb to counter local parcel thieves. It was picked up a few days ago by the BBC, back when it had a mere 6 million views. The video is genuinely fascinating, especially towards the end where it shows footage captured by the integrated mobile phones of various thieves opening it up and triggering explosions of glitter followed by releases... Read more →